1. First, sweep the floor or vacuum the floor. The floor should be clear of all debris including furniture, and storage containers. Run the pressure washer on high-pressure hot water. The hot water and the pressure will deep clean the pores of the concrete removing heavy dirt.
2 . Use the push broom to push the water out. If your basement cannot handle a pressure wash, Use the bucket and the mop to wash the floor. Repeat this process twice if necessary or until it’s completely clean. When you’re done washing the floor, dry it with a large old towel or a dry mop. These are sure to absorb any settled water.
Special Tip…
Washing the floor before treating the stains will allow you to spot the location of the stains way easier than if they were covered in dust and dirt.
 Removing The Stains…
The best way to remove stains on a concrete floor is to use dish soap and water. There are other cleaners such as lye, which may not be a wise choice as lye soap will disintegrate the concrete as it is highly acidic. Below are other safe recommended concrete stain cleaner that won’t damage the floor.
Instructions….
Step 1. Sprinkle the water directly onto the stain
Step 2. Pour the dish soap onto the stain
Step 3. Use the scrubbing brush to scrub the area for 3 – 5 minutes
Step 4. Use a damp microfiber cloth to wipe the spot each time you scrub. If the stain refuses to budge using any of the below-listed concrete cleaners will help.
Cleaning Concrete Floor With Vinegar
 Concrete Floor Stain Remover Solution with Vinegar:
open next page to continue reading….
